The methanol gasoline filling machine for vehicles is a high-tech filling equipment integrating photoelectric sensing and pneumatic execution. It is controlled by PLC microcomputer. The methanol gasoline filling machine produced by our company is suitable for automotive ethanol, chemical industry, Filling of liquids such as daily chemicals and water. The filling metering is accurate, no bubbles, no dripping. It can be applied to the filling of various bottle types (including guided bottles) of 50-5000ml.
Filling machines with different sizes of containers can switch filling specifications in a few minutes, with a short filling cycle and high production capacity. Replacing the filling specifications without adding spare parts can be done only by adjusting. The user can select the filling quantity according to his own production capacity to determine the quantity of filling heads. The touch screen can display the production status, operating procedures, filling methods, etc. . The screen is intuitive, easy to operate and maintain. Each filling head is equipped with a card opening arrangement to ensure precise alignment of the injection.
Principle of vehicle methanol gasoline filling machine
Using computer quantitative control, the vehicle methanol gasoline filling machine has a feeding system, a weighing system, a frame, a pneumatic controller, a control system and an unpowered raceway.
Feed mode: The feed needs to be continuously stable (using feed pump or hopper pressurization feed)
The feed mechanism performs rapid and slow feed through the cylinder through a solenoid valve.
Filling method: ordinary conventional filling and lifting submersible filling (select when ordering as needed)
The weighing system consists of a weighing bracket, a sensor, a weighing platform with a powerless drum, and a support and filling system.
Pneumatic control system: control fast and slow feed valves.
The weighing platform is not allowed to withstand additional forces during use.
Performance characteristics:
1, using good brand of electrical and pneumatic components, low failure rate, stable and reliable performance, long service life;
2. The contact material is made of stainless steel, easy to disassemble, easy to clean, and meets the hygiene requirements;
3. The filling amount and filling speed are simple to adjust, and there is no bottle filling function, the liquid level is automatically controlled to feed, and the appearance is beautiful;
4. It is possible to quickly adjust and replace bottles of different shapes and specifications without replacing parts, and the applicability is strong;
5. The filling nozzle is equipped with anti-drip device to ensure no drawing or leakage during the filling process.
6. The filling head can be changed to submerged filling, which can effectively prevent the filling material from foaming or splashing.
